Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller {HUB-S-SATA10} * Koeling Systeemkoeling Kabels & Verloopstekkers

Beschrijving

Meer informatie over Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller {HUB-S-SATA10}

—
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.

In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.

For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.

There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.

RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the “source” fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
—

Voor sommige reparaties of vervangende onderdelen is technische kennis vereist, alle reparatie onderdelen kan door ons deskundige personeel en technische dienst in Den Haag vervangen of gemonteerd worden.

Om Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller {HUB-S-SATA10} te kopen en af te halen neem contact op met BorcaDen – Den Haag

Afbeeldingen zijn ter illustratie en kunnen afwijken van het actuele artikel, neem bij vragen altijd even contact op!

INT-HUB-S-SATA10

Koeling,Systeemkoeling,Kabels & Verloopstekkers

 

Let op! Artikelen op nabestelling kunnen soms een levertijd van 2 tot 4 weken hebben omdat sommige minder gangbare producten speciaal voor u besteld worden. Voor afhalen krijgt u binnen 5 werkdagen bericht als uw bestelling klaar ligt in de winkel om afgehaald te worden.